ESC Training Courses

August 2021

Safety Instrumented Systems – FS Engineer (TÜV Rheinland) – Warrington, August 2021

Engineering Safety Consultants Ltd. is an approved course provider for Safety Instrumented Systems trainings of the TÜV Rheinland Functional Safety Program.

Read More

When
17/08/2021 - 20/08/2021
9:00 am to 5:00 pm

Where
Warrington, Warrington

September 2021

Safety Instrumented Systems – FS Engineer (TÜV Rheinland) – Bristol, September 2021

Engineering Safety Consultants Ltd. is an approved course provider for Safety Instrumented Systems trainings of the TÜV Rheinland Functional Safety Program.

Read More

When
14/09/2021 - 17/09/2021
9:00 am to 5:00 pm

Where
Bristol, Bristol

Introduction to COMAH – Online, September 2021

This one day course will focus on the generic standard IEC 61508, which is a key cornerstone of sector and other related standards, and set out the relationships to other sectors and product standards.

Read More

When
21/09/2021
9:00 am to 5:00 pm

Where
Online, Classroom

October 2021

IEC 61508 Software Safety Training Course Online – Online, October 2021

Course Learning Objectives By the end of this software safety training course, participants should have an appreciation of: Management of functional safety for software Distinction between software and hardware safety Deriving software safety requirements from the system safety requirements Defining software safety requirements using appropriate hazard identification and risk assessment methods Selection of appropriate software architecture, methods and techniques to meet the allocated SIL requirements Software safety in the context of other related standards such as IEC 61511, EN 50128, Def Stan 00-055, DO-178, ARP4754, CAP 670 and so on Future developments of IEC 61508 Outline Content Introduction to IEC 61508 Management of functional safety and functional safety assessment IEC 61508 compliance framework and compliance requirements for software Differences between software and hardware safety requirements Software safety lifecycle in the context of the overall safety lifecycle Software systematic capability and systematic safety integrity Software safety requirements (including differences between system and application software) Software configuration management and traceability Software modification Software verification and validation (V&V) Tool qualification Software safety in the context of other related standards such as IEC 61511, EN 50128, Def Stan 00-055, DO-178, ARP4754, CAP 670 and so on New developments in IEC 61508 on software safety Full Software Safety Training Course Outline is available here Course Leader Dr Fan Ye, GICSP, CFSE, FS Eng (TÜV Rheinland), CEng, MSaRS, MIET Principal Consultant, Engineering Safety Consultants (ESC) Limited Dr Fan Ye has worked in safety consultancy in industries including oil and gas, chemical, nuclear power and defence since completing his PhD in 2005. Fan is a Charted Engineer (CEng) by the Engineering Council via IET. He is a GIAC certified Global Industrial Control Security Professional (GICSP). He is a Certified Functional Safety Expert (CFSE) and TÜV Rheinland and Technis certified Functional Safety Engineer. His expertise lies in the areas of hazard identification and risk assessment, safety case development, safety management, system reliability, and ICS Cyber Security. Fan is a committee member of both the BSI GEL/65/1 and the IEC 61508 Part 3. Fan has extensive knowledge on international safety standards such as IEC 61508, IEC 61511 and UK Defence Standards and Military of Defence (MoD) policy. Fan is familiar with UK’s Health and Safety legislation and the As Low As Reasonably Practicable (ALARP) principle for safety risk management underpinned by cost benefit analysis. Fan has chaired and facilitated numerous HAZOP and SIL determination (LOPA) studies in the UK and Middle East. He has also led a number of SIL verification studies and Quantitative Risk Assessments (QRAs) for major projects. All training courses will be held at 9.00am and finish at 4:00pm.

Read More

When
05/10/2021 - 06/10/2021
9:00 am to 5:00 pm

Where
Online, Classroom

Functional Safety Training Bundle – Humberside, October 2021

Engineering Safety Consultants Ltd. is an approved course provider for Safety Instrumented Systems trainings of the TÜV Rheinland Functional Safety Program.

Read More

When
18/10/2021 - 22/10/2021
9:00 am to 5:00 pm

Where
The Catch Center, Stallingborough North East Lincolnshire

Introduction to Functional Safety – Humberside, October 2021

The course will focus on the fundamentals of Functional Safety, incorporating the generic standard IEC 61508, which is a key cornerstone of subject and other related standards. The course continues and sets out the relationships to other sector and product standards. This is a standalone course for people interested in finding out more on Functional Safety and is a benefit for those attending the TÜV Rheinland FS Engineer’s course, providing a grounding/reminder of the foundations of Functional Safety in advance of the four-day course. Click here for a brief Introduction to Functional Safety. The course can be delivered in person or via our virtual classroom. By the end of this course, participants should have an appreciation of Management of functional safety Safety Lifecycle Concepts Compliance framework for IEC 61508 Functional safety and the role of IEC 61508 and other related standards in achieving functional safety The concept of risk reduction, risk reduction parameters and the concept of a tolerable risk The concept of a safety function with respect to its functionality and its performance The role of a safety-related, other engineered measures and risk parameters in achieving a tolerable risk Concept of Safety Integrity and Safety Integrity Level (SIL) SIL determination concepts and methods Functional Safety Assessment and Certification Full Course Outline is available here

Read More

When
18/10/2021
9:00 am to 5:00 pm

Where
The Catch Center, Stallingborough North East Lincolnshire

Safety Instrumented Systems – FS Engineer (TÜV Rheinland) – Humberside, October 2021

Engineering Safety Consultants Ltd. is an approved course provider for Safety Instrumented Systems trainings of the TÜV Rheinland Functional Safety Program.

Read More

When
19/10/2021 - 22/10/2021
9:00 am to 5:00 pm

Where
The Catch Center, Stallingborough North East Lincolnshire
1 2